User Manual

99-8300 Dash Disassembly
TWO
SCREWS
ON EACH
SIDE
SIDE VIEW
CLOCK/DISPLAY-
RADIO ASSEMBLY
Toyota Highlander 2013
1. Unclip and remove the
A/C vent panel. (Figure A)
2. Unclip and remove the trim panel
containing the A/C control
and pocket. (Figure B)
3. Remove (4) 10 mm bolts securing
the radio assembly. (Figure C)
4. Remove the (4) Phillips screws
securing the clock/display then
remove the clock/display from
the radio assembly. (Figure D)
Continue to kit assembly
12
(2) Screws
on each side
Side view
clock/display
radio assembly
(Figure A) (Figure C)
(Figure B) (Figure D)