User Manual

REV. 2/13/2018 INST99-8267
3
KIT ASSEMBLY
(Figure B)
(Figure A)
(Figure A)
(Figure B)
(Figure C)
ISO DIN radio provision with pocket
1. Attach the radio brackets to the radio
trim panel using the (4) #8 x 3/8” Phillips
screws provided. (Figure A)
2. Attach the pocket to the radio brackets
using the (4) #8 x 3/8” Phillips screws
provided. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the bracket/pocket
assembly and then secure it using the
screws supplied with the radio. (Figure C)
5. Locate the factory wiring harness and
connector in the dash and complete all
necessary connections to the radio. Metra
recommends using the proper mating
adapter from Metra and/or Axxess.
Test the radio for proper operation.
6. Secure the completed assembly into
the dash using the factory screws.
7. Reassemble the dash in reverse order
of disassembly.
ISO DDIN radio provision
1. Attach the radio brackets to the radio
trim panel using the (4) #8 x 3/8” Phillips
screws provided. (Figure A)
2. Slide the radio into the bracket assembly
and then secure it using the screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness and
connector in the dash and complete all
necessary connections to the radio. Metra
recommends using the proper mating
adapter from Metra and/or Axxess.
Test the radio for proper operation.
4. Secure the completed assembly into
the dash using the factory screws.
5. Reassemble the dash in reverse order
of disassembly.