User Manual

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

Metra. The World’s Best Kits.



INSTALLATION INSTRUCTIONS

99-8267

KIT FEATURES

• ISO DIN radio provision with pocket

• ISO DDIN radio provision

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8” Phillips screws

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• 10mm Socket wrench

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Assembly

–ISO DIN radio provision with pocket ..................3

–ISO DDIN radio provision .....................................3

WIRING & ANTENNA CONNECTIONS

(sold separately)

Wiring Harness: 70-1761

Antenna Adapter: L Trim: Not required

S Trim: 40-LX11

Steering Wheel Control Interface: ASWC-1

A B C

Toyota Matrix 2013

PAGE 1
99-8267 I N S TA L L AT I O N I N S T R U C T I O N S Toyota Matrix 2013 TABLE OF CONTENTS Dash Disassembly...................................................2 Kit Assembly –ISO DIN radio provision with pocket...................3 –ISO DDIN radio provision......................................
PAGE 2
DASH DISASSEMBLY 1. Unclip and remove the panel from around the radio. (Figure A) 2. Remove four 10mm bolts and remove factory radio. (Figure B) PASSENGER SECURITY (Figure B) 12 3 4 5 0 Continue to Kit Assembly A/C (Figure A) 2 1.800.221.0932 | MetraOnline.
PAGE 3
KIT ASSEMBLY ISO DIN radio provision with pocket ISO DDIN radio provision 1. Attach the radio brackets to the radio trim panel using the (4) #8 x 3/8” Phillips screws provided. (Figure A) 1. Attach the radio brackets to the radio trim panel using the (4) #8 x 3/8” Phillips screws provided. (Figure A) 2. Attach the pocket to the radio brackets using the (4) #8 x 3/8” Phillips screws provided. (Figure B) 2.
PAGE 4
99-8267 I N S TA L L AT I O N I N S T R U C T I O N S IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.