Quick Start Guide

1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY KIT PREPARATION
Please visit Metraonline.com for
Dash Disassembly illustrations.
Please visit Metraonline.com for
Kit Preparation illustrations.
1. Unclip and remove the dashboard trim
panel below the climate controls.
2. For models with a push button start:
Unclip the Start/Stop button trim panel
and set it to the side.
For models without a push button start:
Unclip and remove the trim panel to the
left of the radio/climate control panel.
3. Unclip and remove the lower dashboard
trim panel directly above the glovebox.
4. Unclip and remove the upper dashboard
trim panel with a/c vent.
5. Unclip the climate control panel and set
it to the side.
6. Remove (4) 10mm screws securing the
radio panel, then unplug and remove
the panel.
Continue to Kit Preparation
1. Unclip and remove the passenger airbag
light assembly from the factory radio
panel, then attach the assembly to the
radio trim panel .
2. Remove the panel clips from the factory
radio panel, then attach them onto the
radio trim panel .
Continue to Kit Assembly