User Manual

99-8260B
5
Kit Assembly
(Figure A) (Figure B)
ISO DDIN radio provision
1. Attach the radio bracket/trim panel
assembly to the radio using the
screws supplied with the radio.
(Figure A)
2. Attach the climate control/display
removed in dash disassembly to the
trim panel/bracket assembly with
the factory hardware. (Figure B)
3. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for proper
operation.
4. Reassemble the dash in reverse
order of disassembly.