User Manual

99-8260B
4
Kit Assembly
(Figure B)
(Figure A)
(Figure C)
ISO DIN radio provision with pocket
1. Attach the pocket to the radio
bracket/trim panel assembly using
the (4) supplied #8 x 3/8” Phillips
screws provided. (Figure A)
2. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3. Slide the radio into the completed
assembly, and then secure it to the
assembly using the screws
supplied with the radio. (Figure B)
4. Attach the climate control/display
removed in dash disassembly to the
trim panel/bracket assembly with
the factory hardware. (Figure C)
5. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for
proper operation.
6. Reassemble the dash in reverse
order of disassembly.