User Manual

99-8240B
2
1. Unsnap panel with vent on driver’s
side and remove. (Figure A)
2. Remove (2) Phillips screws on
panel below steering column with
hood release on it and remove
panel. (Figure A)
3. Unclip and remove panel
surrounding under side of steering
column. (Figure B)
4. Unclip and remove panel above
steering column. (Figure C)
5. Unclip and remove vent panel
surrounding the shifter. (Figure D)
6. Open glove box and remove vent
panel next to the radio. (Figure D)
Dash Disassembly
(Figure B)
(Figure C)
(Figure F)
(Figure G)(Figure D)(Figure A)
(Figure E)
7. Remove (2) Phillips screws from
flip open panel below radio, unclip
and remove. (Figure E)
8. Remove (2) 10mm bolts from info
center display above radio, unclip
and remove. (Figure F)
9. Remove (2) 10mm bolts from top
of radio assembly. (Figure G)
10. Remove (2) 10mm bolts from
bottom of radio assembly, unclip
radio and remove. (Figure G)
Continue to kit assembly