Owner's Manual

INSTALLATION INSTRUCTIONS FOR PART 99-8232B
METRA. The World’s best kits.
™
metraonline.com1-800-221-0932
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
REV. 10/9/2012 INST99-8232B
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
Kit Assembly
(Figure A)
DDIN radio provision
1. Removethefactorypanelclipsandattach
totheMetraradiotrimpanelinthesame
order.Thiskitcomeswithsixpanelclipsthat
willonlyworkwiththeuppersixlocations
aroundthevents.Thetwolowerclipsmust
befactory.
2. Mounttheclimatecontroltothefactory
bracketswiththefactoryhardware.
(FigureA)
3. MounttheDDINaftermarketradiotothe
climatecontrol/bracketsassemblyusingthe
screwssuppliedwiththeheadunit.
(FigureA)
4. Locatethefactorywiringharnessinthe
dash.Metrarecommendsusingtheproper
matingadapterfromMetraorAXXESS.
Re-connectthenegativebatteryterminal
andtesttheunitforproperoperation.
5. Mounttheradio/climatecontrolassembly
intothedash.
6. Reassembledashinreverseorderof
disassemblyusingthe99-8232B
radiotrimpanel.