User Manual

1. Remove (2) plastic Phillips screws one
from each side of the trim panel below
the cup holder then unclip and remove
the panel. (Figure A)
2. Pull the cup holder out and depress the
(2) clips on each side to slide cup holder
out of cup holder panel. (Figure B)
3. Remove (4) Phillips screws from cup
holder panel assembly then unclip and
remove assembly. (Figure C)
4. Unclip and remove the climate control
assembly. (Figure D)
5. Remove (4) 10 mm bolts securing
the radio.
6. Unclip the right side of the instrument
panel trim and pull back then unclip and
remove radio.
Continue to kit assembly
5
Toyota Tundra 2007-up (column shift)
Toyota Sequoia 2008-up (column shift)
Dash Disassembly 99-8220
(Figure B)
(Figure D)
(Figure C)
(Figure A)