User Manual

8
DIN radio provision with pocket
Kit Assembly 99-8209
1. SlidetheMountingBracketsontothe
sidesoftheRadioHousinguntiltheside
clipsengage.(FigureA)
Note: Use Bracket Set 1 for xA, xB, and
tC. Use Bracket Set 2 for the 2008 xB
and xD.
2. ForBracketSet1cutandremoveall
mountingtabsexceptthetabsbeing
usedforyourapplication.(FigureB)
 Note:Tabs are marked xA, xB and tC.
For Bracket Set 2 skip to step 3.
3. SlidetheDINcageintotheRadio
housingandsecurebybendingthe
metallockingtabsoutward.(FigureC)
4. Slidetheaftermarketradiointothecage
untilitsnapsintoplace.(FigureD)
5. Locatethefactorywiringharnessin
thedash.Metrarecommendsusingthe
propermatingadapterfromMetraor
AXXESS.Re-connectthenegative
batteryterminalandtesttheunitfor
properoperation.
6. Reassembledashinreverseorder
ofdisassembly.
(Figure B)
(Figure C)
(Figure D)
(Figure A)
side clips
Bracket Set 1