User Manual

99-8151
2
1. Using a panel removal tool, unsnap
and remove the liner from the tray
above the center vents. (Figure A)
2. Remove (2) Phillips screws from
inside the tray. (Figure B)
3. Using a panel removal tool, unsnap
and remove the center trim panel
including the vents and tray. (Figure C)
4. Using a panel removal tool, unsnap
and remove the switch panel
below the radio. (Figure D)
5. Remove (4) 10mm bolts securing
the radio/climate control assembly,
unplug, and then remove the
assembly. (Figure E)
6.
Remove (4) Phillips screws securing
the climate control panel to the
radio/climate control assembly, and
then unplug and remove the panel.
Note: The climate control panel and
screws will be reused in kit preparation.
Continue to kit preparation
Dash Disassembly
SNOW
TRAC
OFF
(Figure A)
(Figure B)
(Figure C)
(Figure D)
(Figure E)