User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 99-7883HG Single/Double DIN Dash Kit for 2015- Honda Fit Vehicles (Black)

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 3/25/2015 INST99-7883HG

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 99-7883HG

• ISODINradioprovisionwithpocket

• Painted high gloss black

•A)Radiotrimpanel•B)Brackets•C)Pocket•D)(4)#8x3/8”Phillipsscrews

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS(soldseparately)

WiringHarness:•70-1729

AntennaAdapter:•40-HD11

•Phillipsscrewdriver•Panelremovaltool

TOOLS REQUIRED

Honda Fit 2015-up

99-7883HG

A B C D

Dash Disassembly

– HondaFit2015-up............................................... 2

Kit Assembly

– ISO DINradioprovisionwithpocket...................... 3

Table of Contents

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-7883HG APPLICATIONS Table of Contents Honda Fit 2015-up 99-7883HG Dash Disassembly – Honda Fit 2015-up ............................................... 2 Kit Assembly – ISO DIN radio provision with pocket...................... 3 KIT FEATURES • ISO DIN radio provision with pocket • Painted high gloss black REV.
PAGE 2
99-7883HG Dash Disassembly 4. Unclip and remove the a/c vent trim panel including the vents above the factory radio. (Figure D) 1. Remove (1) Phillips screw from the trim panel below the a/c control that houses the accessory socket and factory USB’s then unclip and remove the panel. (Figure A) 5. Remove (2) 8mm bolts securing the factory radio then unclip and remove the radio. (Figure E) 2. Remove (1) 8mm bolt facing up in cavity behind a/c control. (Figure B) 3.
PAGE 3
99-7883HG Kit Assembly ISO DIN radio provision with pocket 1. Attach the air bag light and hazard switch to the 99-7883 radio trim panel. 2. Mount the pocket to the brackets with the (4) #8 x 3/8” Phillips screws supplied. (Figure A) 3. Slide the radio into the assembly and secure with the screws supplied with the radio. (Figure B) 4. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. (Figure A) (Figure B) 5.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 99-7883HG KNOWLEDGE IS POWER REV. 3/25/2015 INST99-7883HG Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7883HG AplicAciones Indice Honda Fit 2015 y mas 99-7883HG Desmontaje del tablero – Honda Fit 2015 y mas ..............................................2 Ensamble del kit – Provisión de radio ISO DIN con cavidad ..................
PAGE 6
99-7883HG Desmontaje del tablero 4. Desenganche y quite el panel de la moldura de la rejilla de aire acondicionado incluyendo las rejillas situadas arriba del radio de fábrica. (Figura D) 1. Quite un (1) tornillo Phillips del panel de la moldura que está debajo del control del aire acondicionado que aloja el tomacorriente de accesorios y los USB de fábrica, luego desenganche y quite el panel. (Figura A) 2.
PAGE 7
99-7883HG Ensamble del kit Provisión de radio ISO DIN con cavidad 1. Una la luz de la bolsa de aire y el interruptor de luces intermitentes al panel de la moldura del radio 99-7883. 2. Monte la cavidad a los soportes con los (4) tornillos Phillips #8 de 3/8” suministrados. (Figura A) 3. Deslice el radio en el ensamble y sujételo con los tornillos suministrados con el radio. (Figura B) 4. Localice el arnés de cableado de fábrica y el conector de la antena en el tablero.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7883HG EL CONOCIMIENTO ESOWER PODER K NOWLEDGE IS P Mejore sus habilidades de instalación y fabricación REV. 3/25/2015 INST99-7883HG Enhance your installation and fabrication skills by enrolling in the en most recognized and respected inscribiéndose la escuela de dispositivos electrónicos mobile school in our industry. móvileselectronics más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.