User Manual

5
STACKED ISO UNITS PROVISION
Cut and remove the center bar from
the Radio Housing.
(Figure A)
1
Snap the Double DIN brackets to the
inside edge of the Radio Housing.
(Figure B)
2
Slide the stacked ISO mount units into
the Double DIN Bracket/Radio Housing
assembly and secure the units to the
assembly using the screws supplied
with the units.
(Figure C)
3
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
A
B
C
Snap the Double DIN trim-plate onto
the front of the Housing/Radio assem-
bly. (Figure C)
4
99-7873 KIT ASSEMBLY