User Manual

7
Kit Assembly 99-7871
1.
 Attachthebracketstotheradio
housingtrimpaneltrimplatewith
thesupplied#8x3/8”screws.
(FigureB)
2. Fromtheback,slidethedouble
DINradiointothebracket/radio
housingassemblyandsecure
usingthescrewssuppliedwiththe
radio.(FigureC)
3. Locatethefactorywiringharness
andantennapluginthedash.
Metrarecommendsusingthe
propermatingadaptersfromMetra
and/orAXXESS.
4. Mountthenewradioassemblyinto
thedashandreassembledashin
reverseorderofdisassembly.
Double DIN radio provision
(Figure B) (Figure C)