User Manual

ManualsBrandsMetra ManualsCar Electronics & GPSInstallation Kit for 2006-2011 Honda Civic Vehicles - Taupe

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 7/22/2014 INST99-7871

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 99-7871

• ISODINradioprovisionwithpocket

• DoubleDINradioprovision

• Painted to match factory dash:

99-7871= Gunmetal, 99-7871T= Taupe

•A)Radiohousing•B)Brackets•C)Pocket•D)Airbag(indicator light)blankplate•E)(6)Metalclips

•F)(5)Whiteplasticclips•G)(10)#8Phillipsscrews

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS(soldseparately)

WiringHarness:

•70-1722-Honda2006-up

AntennaAdapter:

•40-HD10-Honda2005-up

•Phillipsscrewdriver•Panelremovaltool

•Socketwrench

TOOLS REQUIRED

Honda Civic 2006-2011

99-7871

See application list inside

A B C D

F G

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-7871 APPLICATIONS See application list inside WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: • 70-1722 - Honda 2006-up Antenna Adapter: • 40-HD10 - Honda 2005-up Honda Civic 2006-2011 99-7871 KIT FEATURES • ISO DIN radio provision with pocket • Double DIN radio provision • Painted to match factory dash: 99-7871= Gunmetal, 99-7871T= Taupe TOOLS REQUIRED • Phillips screwdriver • Panel removal tool • Socket wrench REV.
PAGE 2
99-7871 Dash Disassembly 99-7871 Table of Contents Honda Civic 2006-2011 Dash Disassembly 1. Unclip and remove the panel below the steering wheel. (Figure A) – Honda Civic 2006-2011................................................................................... 2-3 2. Remove the (1) Phillips screw exposed on the lower left side of the panel above the steering wheel and around the instrument cluster. (Figure B) Kit Assembly – ISO DIN radio provision with pocket..................................
PAGE 3
Dash Disassembly 99-7871 Honda Civic 2006-2011 4. Remove panel inside pocket below radio and climate controls then remove (2) 8 MM screws facing up behind panel. (Figure D) 9 10 67 5. Unclip and remove radio/climate control assembly. (Figure E) 6. Remove (3) Phillips screws securing the A/C vent to the radio/climate control panel. (Figure F) 7. Remove the (4) Phillips screws securing the climate control to the radio/climate control panel. (Figure F) 76 (Figure D) 8.
PAGE 4
Kit Assembly 99-7871 ISO DIN radio provision with pocket Note: Secure the A/C vent, climate control, hazard switch, and the passenger air bag on/off light into the 99-7871 radio housing panel using the factory hardware. (Figure A1) Position the (6) metal factory retaining clips and (5) plastic white clips onto the radio housing in the same location as the factory radio/climate control panel.
PAGE 5
Kit Assembly 99-7871 ISO DIN radio provision with pocket 1. Mount the pocket to the radio brackets with the (4) #8 x 3/8” Phillips screws supplied. (Figure B) 2. Mount the bracket/pocket assembly to the radio housing trim panel with the included #8 screws. (Figure C) 3. Slide the radio into the radio brackets and secure with screws supplied with the radio. (Figure D) (Figure B) 4. Locate the factory wiring harness and antenna plug in the dash.
PAGE 6
Kit Assembly 99-7871 Double DIN radio provision Note: Secure the A/C vent, climate control, hazard switch, and the passenger air bag on/off light into the 99-7871 radio housing panel using the factory hardware. (Figure A1) Position the (6) metal factory retaining clips and (5) plastic white clips onto the radio housing in the same location as the factory radio/climate control panel.
PAGE 7
Kit Assembly 99-7871 Double DIN radio provision 1. Attach the brackets to the radio housing trim panel trim plate with the supplied #8 x 3/8” screws. (Figure B) 2. From the back, slide the double DIN radio into the bracket/radio housing assembly and secure using the screws supplied with the radio. (Figure C) 3. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 4.
PAGE 8
INSTALLATION INSTRUCTIONS FOR PART 99-7871 KNOWLEDGE IS POWER REV. 7/22/2014 INST99-7871 Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.