Specifications

7
Slide the aftermarket head units into
the cages and secure. (
Figure C)
C
Slide the DIN cages into the Radio
Housing and secure by bending the
metal locking tabs outward.
(Figure B)
1
2
STACKED DIN HEAD UNIT PROVISION
99-7871
KIT ASSEMBLY
A1
B
BACK
F
RONT
(6) METAL RETAINING CLIPS
(5)
W
HITE
PLASTIC
R
ETAINING
CLIPS
A2
NOTE: Secure the a/c vent, climate
control, hazard switch, and the pas-
senger air bag on/off light into the
99-7871 radio housing panel using
the factory hardware.
(Figure A1)
Position the (6) metal factory retain-
ing clips and (5) plastic white clips
onto the radio housing in the same
location as the factory radio/climate
control panel.
(Figure A2)