Specifications

5
Attach the corresponding bracket to
the DDIN head unit. (Figure C)
2
C
D
Remove the center bar from the 99-
7871 radio housing. (Figure B)
1
Insert the DDIN trim plate into the
radio housing. (Figure D)
3
DOUBLE DIN HEAD UNIT PROVISION
99-7871
KIT ASSEMBLY
A1
BACK
FRONT
(6) METAL RETAINING CLIPS
(5)
WHITE
PLASTIC
RETAINING
C
LIPS
A2
B
Position the bracket/radio assembly
to the back of the radio housing and
secure with the (8) Phillips screws
provided.
(Figure D)
4
NOTE: Secure the a/c vent, climate
control, hazard switch, and the pas-
senger air bag on/off light into the
99-7871 radio housing panel using
the factory hardware.
(Figure A1)
Position the (6) metal factory retain-
ing clips and (5) plastic white clips
onto the radio housing in the same
location as the factory radio/climate
control panel.
(Figure A2)