Specifications

4
Snap the Trim plate into the Radio
Housing.
(Figure D)
4
ISO DIN HEAD UNIT PROVISION
99-7871
KIT ASSEMBLY
NOTE: Secure the a/c vent, climate
control, hazard switch, and the pas-
senger air bag on/off light into the
99-7871 radio housing panel using
the factory hardware.
(Figure A1)
Position the (6) metal factory retain-
ing clips and (5) plastic white clips
onto the radio housing in the same
location as the factory radio/climate
control panel.
(Figure A2)
Slide the head unit into the radio
opening until the side clips engage.
(Figure D)
3
Mount the ISO Brackets to the head
unit with the screws supplied with
the unit.
(Figure C)
2
C
D
BACK
FRONT
(6) METAL RETAINING CLIPS
(
5)
WHITE
PLASTIC
RETAINING
CLIPS
A1
A2
B
Slide the pocket into the bottom sec-
tion of the kit housing.
(Figure B)
1