Specifications

3
NOTE: Secure the a/c vent, climate
control, hazard switch, and the pas-
senger air bag on/off light into the
99-7871 radio housing panel using
the factory hardware.
(FigureA1)
Position the (6) metal factory retain-
ing clips and (5) plastic white clips
onto the radio housing in the same
location as the factory radio/climate
control panel.
(Figure A2)
Slide the aftermarket head unit into
the cage and secure.
(Figure D)
3
Slide the pocket into the bottom sec-
tion of the kit housing.
(Figure B)
1
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down.
(Figure C)
2
DIN HEAD UNIT PROVISION
99-7871
KIT ASSEMBLY
C
D
A1
BACK
FRONT
(
6) METAL RETAINING CLIPS
(5)
W
HITE
P
LASTIC
R
ETAINING
CLIPS
A2
B