User Manual

99-7868
4
KIT ASSEMBLY
ISO DIN HEAD UNIT PROVISIONS
Mount the ISO brackets to the head
unit with the screws supplies with
the unit.
(Figure C)
3
A
Slide the head unit into the radio
opening until the side clips engage.
Snap the trim plate into the housing.
(Figure D)
4
B
Position speed clips provided with
the kit onto the top (2) legs on the
radio housing.
(Figure A)
1
Align holes in top of radio housing
with the guide pins on the bottom of
the storage pocket assembly and
secure the pocket assembly to the
legs holding the speed clips with the
(2) screws provided.
(Figure B)
2
C
D