User Manual

REV. 5/7/2018 INST99-7820B
3
1. Secure the radio brackets to the radio
housing using the (4) #8 x 3/8” Phillips
screws provided. (Figure A)
2. Slide the pocket into the bracket/
housing assembly, and then secure it
using the (4) #8 x 3/8” Phillips screws
provided. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the bracket/housing/
pocket assembly, then secure it using
the screws supplied with the radio.
(Figure C)
5. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or Axxess. Test the radio for
proper operation.
6. Secure the radio assembly to the dash
using the factory screws.
7. Reassemble the dash in reverse
order of disassembly to complete the
installation.
(Figure C)(Figure A)
(Figure B)
KIT ASSEMBLY