Installation Manual

REV. 10/31/2017 INST99-7804

WIRING INSTRUCTIONS

Harnesses Included:

• 24-pin gray Honda connector to 14-pin black interface connector, with

pre-wired 12-pin black ASWC-1 harness.

• 24-pin and 12-pin gray Honda connector to 22-pin black interface connector, with a Yellow

female RCA.

• 8-pin gray Honda subwoofer connector to White RCA.

• Blue connector to White connector LVDS cable.

Connections to be made

From the 24-pin gray Honda connector to the aftermarket radio:

• Connect the Red wire to the accessory wire.

• Connect the Black wire to the ground wire.

• Connect the Yellow wire to the battery wire.

• Connect the Blue/White wire to the amp turn on wire

Note:

This wire must be connected to hear sound from the factory ampliﬁer.

• Connect the White wire to the left front positive speaker output.

• Connect the White/Black wire to the left front negative speaker output.

• Connect the Gray wire to the right front positive speaker output.

• Connect the Gray/Black wire to the right front negative speaker output.

• Connect the Green wire to the left rear positive speaker output.

• Connect the Green/Black wire to the left rear negative speaker output.

• Connect the Purple wire to the right rear positive speaker output.

• Connect the Purple/Black wire to the right rear negative speaker output.