User Manual

1.800.221.0932
|
MetraOnline.com
8
With the key in the off position:
For models without factory NAV:
1. Connect the 20-pin to 24-pin “interface to display” harness into the Axxess interface, and
then to the 24-pin display harness in the vehicle.
2. Connect the 14-pin to 14-pin “interface to climate control” harness into the Axxess interface,
and then to the 14-pin connector in the left side of the radio trim panel with climate controls .
3. Connect the 14-pin to 18-pin “keypad” harness into the keypad, and then to the 14-pin
connector in the right side of the radio trim panel with climate controls.
4. For models with a factory Bose amplifier, connect the 12-pin harness with RCA jacks to the
wiring harness in the vehicle.
5. Connect the 7633 harness into the Axxess interface, and then to the wiring harness in the
vehicle.
6. Reconnect the factory harness to the climate control module.
Note: Failure to connect this factory module will result in no climate control function.
For models with factory NAV:
1. Connect the 12-pin to 20-pin “interface to display” harness into the Axxess interface, and
then to the 12-pin display harness in the vehicle.
2. Connect the 14-pin to 14-pin “interface to climate control” harness into the Axxess interface,
and then to the 14-pin connector in the left side of the radio trim panel with climate controls.
3. Connect the 14-pin to 18-pin “keypad” harness into the keypad, and then to the 14-pin
connector in the right side of the radio trim panel with climate controls.
4. Connect the 32-pin harness with RCA jacks to the wiring harness in the vehicle.
5. Connect the 7633 harness into the Axxess interface, and then to the wiring harness
in the vehicle.
6. Reconnect the factory harness to the climate control module.
Note: Failure to connect this factory module will result in no climate control function.
INSTALLING THE INTERFACE