User Manual

1.800.221.0932
|
MetraOnline.com
4
AXXESS INTERFACE INSTALLATION
INTERFACE FEATURES
INTERFACE COMPONENTS
• Axxess interface
Group 1 harness (for models
without factory NAV)
• 7633 harness (labeled LD-7625 & LD-7625-VID)
– Main harness with (5) connectors
– 14-pin to 18-pin “keypad” harness
– 14-pin to 14-pin “interface to climate control” harness
– 12-pin harness with RCA jacks
– 20-pin to 24-pin “interface to display” harness
Group 2 harness (for models with factory NAV)
• 7633 harness (labeled LD-7620-NAV)
– Main harness with (4) connectors
– 14-pin to 18-pin “keypad” harness (from LD-7625 package)
– 14-pin to 14-pin “interface to climate control” harness
– 32-pin harness with RCA jacks
– 12-pin to 20-pin “interface to display” harness
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
TABLE OF CONTENTS
Connections to be made ...........................................................................................................5-7
Group 1 harness (for models without factory NAV) ..........................................................5-6
Group 2 harness (for models with factory NAV) .................................................................. 7
Installing the interface .................................................................................................................8
Final Assembly ..............................................................................................................................9
Screen operation ....................................................................................................................... 9-11
• Retains the factory display screen
• Retains the factory backup camera
• Retains the factory AUX-IN jack
• Retains most of the personalization features
• Ability to add an aftermarket backup camera or additional video input
• Works in amplified or non-amplified models
• Prewired ASWC-1 harness included (ASWC-1 sold separately)