User Manual

REV. 1/18/2018 INST99-7633
3
(Figure A) (Figure A)
(Figure B)
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Attach the pocket to the radio bracket /
climate control assembly using the
(4) #8 x 3/8” Phillips screws provided.
(Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio into the assembly and
then secure with the screws supplied
with the radio. (Figure B)
Continue to Axxess Interface Installation
ISO DDIN radio provision
1. Slide the radio into the radio bracket /
climate control assembly and then secure
with the screws supplied with the radio.
(Figure A )
Continue to Axxess Interface Installation