Unit installation

KIT COMPONENTS

Equalizer

Dummy Plate

KIT FEATURES

Shaft and

DIN unit

provisions

Equalizer

provisions

99-7580

INSTALLATION

INSTRUCTIONS

APPLICATIONS

CAR PAGE

NISSAN

Frontier 1998-01.....................................................1-2

Xterra 2000-01.......................................................1-2

TOOLS REQUIRED

Phillips screwdriver

Radio Housing

1-800-221-0932 www.metraonline.com

rev. 250701

PAGE 1
KIT FEATURES Shaft and DIN unit provisions Equalizer provisions KIT COMPONENTS Radio Housing 99-7580 INSTALLATION INSTRUCTIONS APPLICATIONS CAR PAGE NISSAN Frontier 1998-01.....................................................1-2 Xterra 2000-01.......................................................1-2 Equalizer Dummy Plate TOOLS REQUIRED Phillips screwdriver 1-800-221-0932 rev. 250701 www.metraonline.
PAGE 2
ALL VEHICLES 3 Fig. A 1 Fig. B IF AN EQUALIZER WILL BE INCLUDED: Slide the aftermarket equalizer into the back of the Radio Housing. Using the hardware included with the equalizer, mount the unit to the kit. (see Fig. A) Disconnect the negative battery terminal to prevent an accidental short circuit. Remove the ashtray and (2) Phillips screws exposed in the ashtray cavity. Unclip the radio trim bezel and remove. Remove (4) Phillips screws securing the factory head unit and disconnect the wiring.