User Manual

ManualsBrandsMetra ManualsOtherMetra 99-7514B Single or Double DIN Installation Dash Kit for 2010 Mazda 3, Painted Matte Black to Match Dash (Black)

INSTALLATION INSTRUCTIONS FOR PART 99-7514B

99-7514B

APPLICATIONS

MAZDA 3 2010-up

KIT FEATURES

• DIN Radio Provision with Pocket

• ISO Mount Radio Provision with Pocket

• Double DIN Radio Provision

• Stacked ISO Mount Units Provision

• Painted A Matte Black Finish

• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets

• E) Double DIN Trim Plate • F) Pocket • G) (2) Radio Housing Brackets

• H) (2) #8X3/8” Phillips Screws • I) (4) Panel Clips

KIT COMPONENTS

Small Flat Blade Screwdriver • Panel Removal Tool

Phillips Screwdriver

1-800-221-0932

www.metraonline.com

TOOLS REQUIRED:

WIRING AND ANTENNA CONNECTIONS

(Sold Separately)

• 70-7903 Mazda harness - 2001-up

• 40-HD10 -Honda antenna adapter - 2005-up

F G HI

C DE

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-7514B APPLICATIONS MAZDA 3 2010-up 99-7514B KIT FEATURES • DIN Radio Provision with Pocket • ISO Mount Radio Provision with Pocket • Double DIN Radio Provision • Stacked ISO Mount Units Provision • Painted A Matte Black Finish KIT COMPONENTS • A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets • E) Double DIN Trim Plate • F) Pocket • G) (2) Radio Housing Brackets • H) (2) #8X3/8” Phillips Screws • I) (4) Panel Clips A B C F G D H
PAGE 2
99-7514B TABLE OF CONTENTS Dash Disassembly - 2010-up Mazda 3 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Kit Assembly - DIN Mount Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . .3 - ISO Mount Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . 4 - Double DIN /Stacked ISO Mount Units Radio Provision . . . . . . . . . . . .
PAGE 3
95-7514B DASH DISASSEMBLY 2010-UP MAZDA 3 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. FM2 101.2 FM2 101.2 2 Unclip and remove the vent panel above the radio. (Figure A) 3 Remove (2) screws securing the factory radio. (Figure B) 4 Unclip and remove the factory radio. (Figure C) B Continued to kit assembly. C FM2 1 101.
PAGE 4
95-7514B KIT PREPARATION 2010-UP MAZDA 3 A 1 Attach the radio housing brackets to the radio housing using the provided (2) Phillips screws. (Figure A,B) 2 Attach the panel clips to the rear of the radio housing. Continue to kit assembly.
PAGE 5
99-7514B KIT ASSEMBLY DIN MOUNT RADIO PROVISION WITH POCKET *Note: Refer also to the instructions included with the aftermarket radio. A 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure A) 3 Snap the pocket into the bottom opening of the radio housing.
PAGE 6
99-7514B KIT ASSEMBLY ISO MOUNT RADIO PROVISION WITH POCKET *Note: Refer also to the instructions included with the aftermarket radio. A 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2 Mount the ISO Brackets to the head unit with the screws supplied with the unit. (Figure A) 3 Snap the pocket into the bottom opening of the radio housing.
PAGE 7
99-7514B KIT ASSEMBLY DOUBLE DIN/STACKED ISO MOUNT UNITS RADIO PROVISION *Note: Refer also to the instructions included with the aftermarket radio. A 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2 Cut and remove the center bar from the radio housing. (Figure A) 3 Snap the Double DIN brackets to the inside edge of the Double DIN trim plate.
PAGE 8
99-7514B INSTRUCTIONS 1-800-221-0932 www.metraonline.com REV.