Owner's Manual

the metal locking tabs down. Slide the aftermarket head unit into the cage until secure. (see

Fig. A). For an intermediate-mount installation, cut and remove the shaft supports from the

Radio Housing. Attach the Snap Spacers to the inner walls of the radio opening. Slide the

DIN cage into the kit and secure by bending the metal locking tabs down. Slide the aftermarket

head unit into the cage until secure. (see Fig. B). For a flush-mount installation, cut and

remove the shaft supports from the Radio Housing. Slide the DIN cage into the kit and secure

by bending the metal locking tabs down. Slide the aftermarket head unit into the cage until

secure. (see Fig. C)

DIN HEAD UNITS: For a

surface-mount installation,

cut and remove the shaft

supports from the Spacer*

and Radio Housing. Place

the Spacer into the Housing.

Slide the DIN cage into the

kit and secure by bending

IF AN EQUALIZER WILL BE INCLUDED: Slide the aftermarket equalizer into the back of the

Radio Housing. Using the hardware included with the equalizer, mount the unit to the kit.

(see Fig. A)

IF AN EQUALIZER WILL NOT BE INCLUDED: Snap the Equalizer Dummy Plate into the

Radio Housing. (see Fig. B)

*OPTIONAL

Fig. B

Fig. C

Fig. A

Fig. B