User Manual

REV. 2/5/2018 INST99-7383
5
(Figure A) (Figure B)
ISO DIN radio provision with pocket
1. Secure the pocket to the radio brackets
using the (4) #8 x 3/8” Phillips screws
supplied. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio into bracket/pocket
assembly and secure with screws
supplied with the radio. (Figure B)
4. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Test the radio for proper
operation.
5. Secure the completed assembly into the
dash using the factory screws.
6. Reassemble the dash in reverse
order of disassembly to complete the
installation.
KIT ASSEMBLY