Product Datasheet/Brochure

REV. 1/8/2018 INST99-7381
3
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Attach the radio brackets to the radio
trim panel using the (4) #6 x 3/8”
Phillips screws provided. (Figure A)
2. Attach the pocket to the radio brackets
using the (4) #8 x 3/8” Phillips screws
provided. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the bracket/pocket
assembly and then secure it using the
screws supplied with the radio. (Figure C)
5. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
6. Reassemble the dash in reverse order
of disassembly.
ISO DDIN radio provision
1. Attach the radio brackets to the radio
trim panel using the (4) #6 x 3/8”
Phillips screws provided. (Figure A)
2. Slide the radio into the bracket assembly
and then secure it using the screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
4. Reassemble the dash in reverse order
of disassembly.
(Figure A)
(Figure B)
(Figure C)
(Figure B)
(Figure A)