User Manual

99-7347B
Kit Assembly
(Figure A) (Figure A)
(Figure B) (Figure B)
(Figure C) (Figure C)
ISO DIN radio provision with pocket
1. Snap the radio trim panel into
the factory radio surround panel.
(Figure A)
2. Attach the pocket to the radio
brackets using the (4) supplied #8
x 3/8” Phillips screws. (Figure B)
3. Slide the radio into the completed
assembly, and secure it using
screws supplied with the radio.
(Figure B)
4. Locate the factory wiring harness
& antenna connector in the dash.
Metra recommends using the
proper mating adapter from Metra
or AXXESS. Test the radio for
proper operation.
5. Reassemble the dash in reverse
order of disassembly. (Figure C)
ISO DDIN radio provision
1. Snap the radio trim panel into
the factory radio surround panel.
(Figure A)
2. Attach the radio brackets to the
radio using the screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness
& antenna connector in the dash.
Metra recommends using the
proper mating adapter from Metra
or AXXESS. Test the radio for
proper operation.
4. Reassemble the dash in reverse
order of disassembly. (Figure C)
3