Specifications

99-7012 KIT ASSEMBLY
4
DOUBLE DIN RADIO PROVISION
STACKED ISO MOUNT UNITS PROVISION
Cut and remove the center bar from
the radio housing.
(Figure A)
1
Snap the Double DIN brackets to the
inside edge of the radio housing.
(Figure B)
2
Slide the Double DIN radio or stacked
ISO mount units into the bracket/radio
housing assembly and secure the radio
or stacked ISO mount units to the
assembly using the screws supplied
with the radio or the ISO mount units.
(Figure C)
3
Snap the Double DIN trim plate onto
the front of the radio/housing assem-
bly. (Figure C)
4
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
A
B
C