User Manual

99-6514B
Kit Assembly
(Figure A)
(Figure B)
(Figure C)
ISO DIN radio provisions
1.
Attach the provided clips to the
radio trim panel (metal clips at top
and plastic at the bottom).
(Figure A)
2.
Mount the pocket to the radio
brackets with the (4) #8 x 3/8”
Phillips pan head screws supplied.
(Figure B)
3.
Slide the aftermarket radio into
radio brackets and secure with the
screws supplied with the radio.
(Figure C)
4.
Locate the factory wiring harness
and antenna plug in the dash.
Note: Refer to the Axxess Interface
Installation section of this manual.
5.
Mount the new radio assembly into
the dash, snap-in the radio housing
panel, and reassemble dash in
reverse order of disassembly.
3
Double DIN radio provisions:
1.
Attach the provided clips to the
radio trim panel (metal clips at top
and plastic at the bottom).
(Figure A)
2.
Mount the double DIN radio to the
radio brackets using the screws
supplied with the radio. (Figure B)
3.
Locate the factory wiring harness
and antenna plug in the dash.
Note: Refer to the Axxess Interface
Installation section of this manual.
4.
Mount the new radio assembly into
the dash, snap-in the radio housing
panel, and reassemble dash in
reverse order of disassembly.
(Figure A)
(Figure B)
Clip
locations
Clip
locations