Specifications

ManualsBrandsMetra Manualschassis components99-6511

INSTALLATION INSTRUCTIONS FOR PART 99-6511

99-6511

APPLICATIONS

Chrysler : Aspen 2008-09/Sebring 2007-09

Town and Country 2008-09/300/300c 2008-09

Dodge: Avenger 2007-09/Caliber 2009/Challenger 2009

Charger 2008-09/Dakota 2008-09/Durango 2008-09

Grand Caravan 2008-09/Journey 2009*

Magnum 2008-09/ Nitro 2007-09/Ram 1500 2009

KIT FEATURES

• DIN Mount Radio Provision with Pocket

• ISO Mount Radio Provision with Pocket

A) Radio Housing with Pocket • B) ISO Brackets • C) ISO Trim Plate

KIT COMPONENTS

TOOLS REQUIRED:

Small Flat Blade Screwdriver/ Panel Removal Tool

• Phillips Screwdriver • Socket Set

1-800-221-0932

www.metraonline.com

Jeep : Compass 2009/Commander 2008-09/Grand Cherokee2008-09/Patriot 2009

Liberty 2008-09/Wrangler 2007-09

Mitsubishi:

Raider 2008-09

WIRING AND ANTENNA CONNECTIONS (Sold Separately)

Harness:

• XSVI-6522-NAV - Chrysler CAN R.A.P. with NAV outputs 07-up

• CHTO-03 - Chrysler CAN amp turn on interface 07-up

Antenna Adapter:

• 40-EU10 - European antenna adapter 02-up

Summary of content (20 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-6511 APPLICATIONS Chrysler : Aspen 2008-09/Sebring 2007-09 Town and Country 2008-09/300/300c 2008-09 Dodge: Avenger 2007-09/Caliber 2009/Challenger 2009 Charger 2008-09/Dakota 2008-09/Durango 2008-09 Grand Caravan 2008-09/Journey 2009* Magnum 2008-09/ Nitro 2007-09/Ram 1500 2009 Jeep : Compass 2009/Commander 2008-09/Grand Cherokee2008-09/Patriot 2009 Liberty 2008-09/Wrangler 2007-09 Mitsubishi: Raider 2008-09 99-6511 KIT FEATURES • DIN Mount Radio Provision with Pocke
PAGE 2
99-6511 TABLE OF CONTENTS Dash Disassembly - Chrysler Aspen 2008-2009/Dodge Durango 2008-2009 . . . . . . . . . . . . 1 - Chrysler Sebring 2007-2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - Chrysler Town and Country 2008-2009 . . . . . . . . . . . . . . . . . . . . . . . . . 3,4 - Chrysler 300/300C 2008-2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - Dodge Avenger 2007-2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
99-6511 DASH DISASSEMBLY CHRYSLER ASPEN 2008-2009 DODGE DURANGO 2008-2009 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. POWER OUTLET 2 Unsnap and remove storage cup holder assembly. (Figure A) 3 Remove (2) screws from bottom edge of center dash trim panel. Unsnap and remove the panel. (Figure B) 4 Remove (4) screws securing the radio. Unplug and remove radio. (Figure C) B 12 3 9 6 Continue to kit assembly.
PAGE 4
99-6511 DASH DISASSEMBLY CHRYSLER SEBRING 2007-2009 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip entire panel surrounding radio including a/c vents and clock. Unplug and remove panel. (Figure A) 3 Remove (4) 7MM screws securing radio. Unplug and remove radio. (Figure B) B Continue to kit assembly.
PAGE 5
99-6511 DASH DISASSEMBLY CHRYSLER TOWN AND COUNTRY 2008-2009 DODGE GRAND CARAVAN 2008-2009 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Remove (2) screw covers facing up above radio then remove the (2) Phillips screws exposed. (Figure A) 3 Lift up on panel above radio then remove (2) Phillips screws exposed at front edge of radio trim panel.
PAGE 6
99-6511 DASH DISASSEMBLY CHRYSLER TOWN AND COUNTRY 2008-2009 DODGE GRAND CARAVAN 2008-2009 D 5 Remove (2) Phillips screws exposed at bottom edge radio trim panel. (Figure D) 6 Unclip and remove entire panel surrounding radio including climate controls, vents and clock. (Figure E) 7 Remove (4) Phillips screws securing radio. (Figure F) Continue to kit assembly.
PAGE 7
99-6511 DASH DISASSEMBLY CHRYSLER 300/300C 2008-2009 DODGE MAGNUM/CHARGER 2008 1 Disconnect the negative battery terminal to prevent an accidental short circuit. A 2 Unsnap and remove center dash trim panel. (Figure A) 3 Remove (4) screws securing the radio. Disconnect and remove the radio. (Figure B) Continue to kit assembly.
PAGE 8
99-6511 DASH DISASSEMBLY DODGE AVENGER 2007-2009 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the center console trim panel. (Figure A) 3 Unclip the center dash trim panel. (Figure B) 4 Remove (4) screws securing the radio. Disconnect and remove the radio. (Figure C) B 5 Remove (3) screws securing the radio rear support bracket and remove the bracket. (Figure D) Continue to kit assembly.
PAGE 9
9-6511 DASH DISASSEMBLY DODGE DAKOTA 2008-2009 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the trim panel surrounding the radio. (Figure A) 3 Remove (4) Phillips screws securing the radio. (Figure B) B Continue to kit assembly.
PAGE 10
99-6511 DASH DISASSEMBLY DODGE NITRO 2007-2009 JEEP LIBERTY 2008-2009 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip entire panel surrounding radio and climate controls, including a/c vents. Unplug and remove panel. (Figure A) 1 2 3 4 5 6 3 Remove (4) 7MM screws securing radio. Unplug and remove radio. (Figure B) B Continue to kit assembly.
PAGE 11
99-6511 DASH DISASSEMBLY DODGE JOURNEY 2009 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the entire factory radio trim panel including the a/c controls. (Figure A) TIP: Open the compartment door at the top of the radio trim panel. 3 Remove (4) 7MM screws securing radio to dash to remove. (Figure B) B NOTE: The top of the metal bracket in the sub dash will need to be cut to allow for the clearance of the Double DIN radio’s chassis.
PAGE 12
99-6511 DASH DISASSEMBLY JEEP COMMANDER/GRAND CHEROKEE 2008-2009 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unsnap and remove the small trim around the console shifer. (Figure A) 3 Unsnap and remove the larger trim around the console shifter. (Figure B) 4 Remove one Phillips screw from inside the small storage pocket in the lower dash, between the power outllets. (Figure C) B 5 Unsnap and remove the dash panel from around the radio (including climate controls).
PAGE 13
99-6511 DASH DISASSEMBLY JEEP WRANGLER 2007-2009 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 1 2 3 4 5 6 2 Unclip and remove the lower center trim below a/c controls. (Figure A) 3 Remove (2) Phillips screws exposed behind lower center panel. (Figure A) 4 Unclip and remove the upper center trim starting towards the rear of the panel. (Figure A) B 5 Remove (2) Phillips screws exposed behind upper center panel.
PAGE 14
99-6511 DASH DISASSEMBLY DODGE CALIBER 2009 DODGE CHALLENGER 2009 JEEP COMPASS 2009 JEEP PATRIOT 2009 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unsnap and move shifter trim to the side. (Figure A) 3 Unsnap center dash trim panel (do not remove until climate controls are removed). (Figure A) 4 Remove (4) Phillips screws holding climate control panel to backside of the center dash panel. 5 Remove (4) 7MM screws securing radio. Unplug and remove radio.
PAGE 15
99-6511 DASH DISASSEMBLY DODGE RAM 1500 2009 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Remove (1) T25 Torx screw in the compartment next to the cup holders. (Figure A) 3 Remove (2) Phillips screws in the pocket below the climate control in the front of the center console. (Figure B) B 4 Remove (2) 9/32” screws in the cup holders. (Figure C) 5 Push down on the collar below the shifter then pull the shifter straight up to remove.
PAGE 16
99-6511 DASH DISASSEMBLY DODGE RAM 1500 2009 7 Unclip and remove the trim panel from the accessory socket on the radio trim panel, then remove (1) T25 Torx screw. (Figure F) F 8 Remove (2) T25 Torx screws from the top of the radio trim panel. (Figure G) 9 Unclip and remove the entire radio trim panel including the climate controls. (Figure H) 10 Remove (4) 9/32” screws securing the radio. (Figure I) Continue to kit assembly.
PAGE 17
99-6511 KIT ASSEMBLY DIN MOUNT RADIO PROVISION WITH POCKET *Note: Refer also to the instructions included with the aftermarket radio. A 1 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs outward. (Figure A) 2 Slide the aftermarket radio into the DIN cage until it snaps into place. (Figure B) Continue to final assembly.
PAGE 18
99-6511 KIT ASSEMBLY ISO MOUNT RADIO PROVISION WITH POCKET *Note: Refer also to the instructions included with the aftermarket radio. A 1 Mount the ISO Brackets to the radio using the screws supplied with the radio. (Figure A) 2 Slide the radio into the radio opening until it snaps into place. (Figure B) 3 Snap the ISO Trim Plate onto the front of the Radio Housing. (Figure B) Continue to final assembly.
PAGE 19
99-6511 FINAL ASSEMBLY FINAL ASSEMBLY A (A) Strip wire ends back 1/2" B B) Twist ends together C) Solder D) Tape C D 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative battery terminal and test the unit for proper operation.
PAGE 20
99-6511 INSTRUCTIONS 1-800-221-0932 www.metraonline.com REV.