Installation Guide

2
386.257.1187
|
MetraOnline.com
DASH DISASSEMBLY
1. Remove the top panel above the
storage pocket. (Figure A)
2. Remove (2) T-15 Torx screws above the
display/radio panel. (Figure B)
3. Unplug and remove the display/radio
panel. (Figure C)
4. Remove the A/C vents and hazard switch
from the panel and set aside for kit
assembly.
5. Remove (4) T-20 Torx screws and remove
the shaded factory sub-dash bracket.
(Figure D)
Continue to Kit Assembly
(Figure A) (Figure C)
(Figure B) (Figure D)