Quick Start Guide

1.800.221.0932

MetraOnline.com

1. Connect the 16-pin harness into port A.

2. Disregard port B, it will not be used in this application..

3. Connect the 5853 harness into port C, and then to the wiring harnesses in the vehicle.

4. Port D is a Micro-B USB input for updating the interface.

INSTALL ATION PROGRAMMING

1. Open the driver’s door, and keep open during the programming process.

2. Cycle the ignition on and wait until the climate control lights turn blue.

Note: If the lights don’t turn blue, unplug port C from the touchscreen for a few seconds,

then try again.

3. Test all functions of the installation for proper operation, before reassembling the dash.

Note: DO NOT CONNECT!