User Manual

1.800.221.0932

MetraOnline.com

AXXESS INTERFACE INSTALLATION

INTERFACE FEATURES

INTERFACE COMPONENTS

• Axxess interface (built into kit)

• 5849 harness

• HVAC interface

• HVAC interface harness

• 4-pin ﬂat to 4-pin stacked harness

• 16-pin harness with stripped leads

• 14-pin harness with stripped leads

• 54-pin backup camera harness

• 12-pin backup camera harness

• Female 3.5mm connector with stripped leads

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun, solder, and heat shrink

• Tape • Wire cutter • Zip ties

• Provides accessory power (12-volt 10-amp)

• Retains R.A.P. (retained accessory power)

• Provides NAV outputs (parking brake, reverse, speed sense)

• Retains audio controls on the steering wheel

• Allows the override of the STOP/START engine feature

• The factory STOP/START button can resume the STOP/START feature

• Retains the factory backup camera

• Can be used in both ampliﬁed and non-ampliﬁed models (including Sony)

• Retains balance and fade (excluding Sony)

• Micro-B USB updatable

TABLE OF CONTENTS

Connections

For models

without

a Sony ampliﬁer ....................................................................................... 7

For models

with

a Sony ampliﬁer ............................................................................................ 8

3.5mm jack - steering wheel control retention ......................................................................9

Backup camera harness ............................................................................................................ 9

Installation ...................................................................................................................................10

Programming ................................................................................................................................11

Conﬁguration Menu ................................................................................................................ 12-14

Attention! This interface will work with models that are either Sony ampliﬁed, or non-

ampliﬁed. Please follow the instructions carefully for your model vehicle. Failure to do

so will result in either no sound, or low sound. If you are unsure if your vehicle is factory

ampliﬁed or not, please contact your local dealership.