User Manual

99-5838CH

Axxess Interface Installation

• Provides accessory power (12-volt 10-amp)

• Retains R.A.P. (retained accessory power)

• Provides NAV outputs (parking brake, reverse, speed sense)

• Retains audio controls on the steering wheel

• Retains SYNC

• Retains the factory backup camera

• Retains balance and fade

• Micro “B” USB updatable

INTERFACE FEATURES

• Wire cutter • Crimp tool • Solder gun • Tape

• Connectors (example: butt-connectors, bell caps, etc.)

TOOLS REQUIRED

• Axxess interface (built into the touchscreen display)

• 5838 harness

• HVAC interface

• HVAC interface harness

• 16-pin harness with stripped leads

• 12-pin backup camera harness

• 4-pin harness with yellow RCA jacks

• Male DIN connector with a 6-pin harness

• Female 3.5mm connector with stripped leads

Connections to be made ......................................................................10-12

Installing the interface ........................................................................12-13

Initializing the interface ........................................................................... 13

Final assembly .......................................................................................... 13

Extra features (SYNC) ............................................................................... 13

Touchscreen display operation ........................................................... 14-15

Steering wheel control settings .......................................................... 16-17

INTERFACE COMPONENTS

TABLE OF CONTENTS