User Manual

99-5838CH
4
Dash Disassembly (cont.)
(Figure I)
(Figure H) (Figure J)
(Figure G)
7. Unclip the shifter trim bezel and
slightly pull it up to clear the center
console removal.
8. Open the center console storage
compartment, unclip the top of the
console, and then slide it toward
the rear of the vehicle to remove it.
(Figure G)
9. Remove the plastic tray in front
of the shifter.
10. Remove the center plastic trim
(knockout) between the power
outlet and USB jack. (Figure H)
Ensure that the vehicle is completely
off before proceeding onto the
following (3) steps:
11. Remove the (4) 9/32” screws
securing the radio/climate control
panel, and then unclip, unplug, and
remove. (Figure I)
12. Remove the (4) 9/32” screws
securing the display screen, then
unplug and remove. (Figure J)
13. Remove the (4) 9/32” screws
securing the radio chassis, then
unplug and remove. (Figure J)
14. If the vehicle is equipped with
SYNC, remove the (3) 9/32” screws
securing the SYNC® module, then
unplug and remove.
Continue to Kit Preparation