User Manual

99-5838CH

Touchscreen display operation

• This is the HVAC control screen which will be displayed on the touchscreen

display. This is considered the main screen.

• Disregard the upper left tab with (3) arrows, it will not be used in this application.

• The upper right tab with the gear icon will take you to the Configuration

Settings screen.

• The climate controls will function in the same manner that they did with the

factory climate controls, yet via touchscreen buttons instead. The temperature

control will display a numerical scale, with “LO” being the coldest, and “HI”

being the hottest: LO / 1-9 / HI

Note: The “Info” button will only be shown if SYNC is to be retained.

HVAC Control screen

Touchscreen calibration:

• Press and hold the upper two soft buttons on either side of the

touchscreen for 10 seconds.

• A screen will pop up asking for you to press the target in the screen.

• After pressing the target with your finger, the calibration process will

be complete, and the screen will disappear.

Continued on the next page