Installation instructions

KIT COMPONENTS

Shaft

Supports

(4) 5mm

Flat-head

Screws

(2) #6 Self-

tapping Screws

ISO-DIN Brackets

99-3043

AW-304GM

INSTALLATION

INSTRUCTIONS

APPLICATIONS

CAR PAGE

CHEVROLET

Blazer 1995-97........................................................1-2

S-10 Pickup 1994-97................................................1-2

GMC

Jimmy 1995-97........................................................1-2

Sonoma 1994-97......................................................1-2

ISUZU

Hombre 1996-97......................................................1-2

OLDSMOBILE

Bravada 1995-97.....................................................1-2

TOOLS REQUIRED

Cutting tool

Socket wrench

Phillips screwdriver

KIT FEATURES

Shaft, DIN and

ISO-DIN unit

provisions

Factory pocket

provisions

(2) Keps Nuts

(2) Carriage Bolts

Radio Housing

Faceplate

rev. 271202

1-800-221-0932 www.metraonline.com

PAGE 1
KIT FEATURES Shaft, DIN and ISO-DIN unit provisions Factory pocket provisions KIT COMPONENTS 99-3043 AW-304GM INSTALLATION INSTRUCTIONS Radio Housing APPLICATIONS Faceplate Shaft Supports (4) 5mm Flat-head Screws (2) Carriage Bolts (2) Keps Nuts (2) #6 Selftapping Screws CAR PAGE CHEVROLET Blazer 1995-97........................................................1-2 S-10 Pickup 1994-97................................................1-2 GMC Jimmy 1995-97....................................................
PAGE 2
ALL VEHICLES 4 "B" Fig. C "A" 1 Fig. A "B" "A" Fig. B 2-SHAFT HEAD UNITS: Snap the Shaft Supports into the Radio Housing. Slide the aftermarket head unit into the kit and secure with shaft nuts. (see Fig. A) DIN HEAD UNITS: Slide the DIN cage into the kit and secure by bending the metal locking tabs down. Slide the aftermarket head unit into the cage until secure. (see Fig. B) Disconnect the negative battery terminal to prevent an accidental short circuit.