User Manual

REV. 1/21/2020 INST99-3031B
3
1. Slide the radio brackets into the radio
bezel. (Figure A)
2. Slide the pocket between the radio
brackets, then secure using (4) Phillips
screws provided. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the bracket/pocket
assembly, then secure using screws
supplied with the radio. (Figure C)
KIT ASSEMBLY
(Figure A)
(Figure B)
(Figure B)
5. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
6. Slide the radio into the dash, then
secure using the factory screws.
7. Reassemble the dash in reverse
order of disassembly to complete the
installation.