Quick Start Guide

99-3018

Axxess Interface Installation

• Provides accessory power (12-volt 10-amp)

• Retains R.A.P. (retained accessory power)

• Can be used in non-amplified, or analog/digital amplified models *

• Provides NAV outputs (parking brake, reverse, and speed sense)

• Prewired ASWC-1 harness included (ASWC-1 sold separately)

• High level speaker input

• Retains balance and fade

• Micro “B” USB updatable

* Please reference the “Service Parts Identification” sticker located under the

spare tire cover. If the RPO code UQA is listed, then the vehicle is equipped

with an analog “DELCO” amplifier. If the RPO code UQS is listed, then the

vehicle is equipped with a digital “BOSE” amplifier.

INTERFACE FEATURES

• Wire cutting tool

• Crimping tool

• Tape

• Connectors (example: butt-connectors, bell caps, etc.)

TOOLS REQUIRED

• Axxess Interface

• 3018 harness

• 16-pin harness with stripped leads

• Resistor pad harness

INTERFACE COMPONENTS

Connections to be made .............................................................................8

For models without an amplifier .......................................................... 8-9

For models with an analog amplifier ............................................... 10-11

For models with a digital amplifier .................................................. 12-13

Installing the interface .............................................................................14

Initializing the interface ...........................................................................14

Adjusting the interface ............................................................................. 14

Final assembly ..........................................................................................15

Table of Contents