Quick Start Guide

99-3018
6
Kit Assembly
(Figure A)
(Figure B)
ISO DIN radio provision with pocket
1. Attach the pocket to the radio
brackets using the (4) #8 x 3/8”
Phillips screws supplied. (Figure A)
2.
Remove the metal “DIN” sleeve and
trim ring from the aftermarket radio.
3. Slide the radio into the bracket/
pocket assembly, and then secure
it using the screws supplied with
the radio. (Figure B)
Continue to Axxess
Interface Installation
ISO DDIN radio provision
1. Attach the radio brackets to the
radio using the screws supplied
with the radio. (Figure A)
Continue to Axxess
Interface Installation
(Figure A)