Quick Start Guide

99-3018
15
Final Assembly
(Figure A)
Secure the radio/bracket assembly into the dash using the factory hardware.
Note: If the vehicle did not have factory navigation, insert the (2) copper
threaded inserts into the empty upper radio mounting holes in the dash cavity.
Snap the radio trim panel over the radio, and then reassemble the dash in
reverse order of disassembly.
The upper dash trim panel is intended for use in NAV equipped vehicles only. A
factory version of this panel is also available from the dealership.
Note: The metal clips for the upper dash trim panel must be oriented per Figure
A or they will not engage properly.