Installation instructions

Kit Assembly 99-2022
7
ISO DIN head unit provision with pocket
1. Mount the radio to the brackets with the
screws included with unit. (Figure A)
2. Mount the pocket to the radio brackets
with the screws supplied. (Figure A)
3. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
4. Mount assembly into the sub dash.
(Figure B)
5. Reassemble dash in reverse order of
disassembly using 99-2022 trim
panel instead of factory panel.
Continue to Interface Installation
(Figure A)
(Figure B)