User Manual

6
Dash Disassembly 99-2011
1.
Unclip dash panel sides and remove.
(Figure A, 1)
2.
Unclip panel below steering column
and remove. (Figure A, 2)
3.
Remove (2) 7mm screws above
instrument cluster. (Figure A, 3)
4.
Set parking brake, turn car on, and
move shifter to the lowest gear.
Tilt steering wheel down then
unsnap entire instrument cluster/
radio panel and remove.
(Figure A, 4)
5.
Remove (3) 7mm screws to
remove radio. (Figure A, 5)
Continue to kit assembly
Buick Roadmaster 1995-1996
1. Remove (6) 9/32” screws inside
glove box. (Figure A, 1)
2.
Under glove box and drivers knee
bolster, remove (2) plastic panels
by turning (2) 1/4 turn fasteners
per side.
3.
Remove (4) 9/32” screws revealed
(2 per side). (Figure A, 3)
4.
Unsnap panel from driver’s side to
passenger’s side.
5.
Remove (3) 9/32” screws to remove
radio. (Figure A, 5)
Continue to kit assembly
Buick Skylark 1996-1998
(Figure A) (Figure A)
(4)
(2)
(3)
(5)
(1)
(5)
(3)
(3)
(1)
(1)