User Manual

5
Dash Disassembly 99-2011
1.
Open center console and remove (2)
screws at front of console opening.
(Figure A)
2.
Remove liners from cup holders and
storage pocket next to cup holders,
then remove screws. Unsnap and
remove panel. (Figure B)
3.
Remove (2) screws from bottom of
radio/climate control bezel, unclip and
remove. (Figure C)
4.
Remove (3) 9/32” hex head screws to
remove radio. (Figure D)
Continue to kit assembly
Buick Rendezvous 2002-2007
(Figure C)
1. Unsnap left side
panel exposing (1)
Phillips screw to
remove. (Figure A, 1)
2.
Remove (1) Phillips
screw and unsnap
right side panel to
expose (1) Phillips
screw beneath panel
and remove.
(Figure A, 2)
3.
Unsnap underside
of overhanging dash
to unsnap (6) plastic
rivets and remove
panel. (Figure A, 3)
4. Remove (5) hex head
screws now exposed
under overhang.
(Figure A, 4)
5.
Unsnap bottom
edge of trim bezel,
then while holding
overhang up, unsnap
and remove trim
bezel by removing
any necessary
harnesses.
6.
Remove (3) Phillips
screw to remove
climate control.
7.
Remove (2) Phillips
screws to remove
rear support and
(3) 9/32” hex head
screws to
remove radio.
Continue to kit
assembly
Buick Riviera 1996-1999
(Figure A)
(Figure D)
(Figure B)
(Figure A)
(4)
(3)
(1)
(2)