User Manual

METRA. The World’s best kits.
™
metraonline.com1-800-221-0932
© COPYRIGHT 2004-2014 METRA ELECTRONICS CORPORATION
REV. 11/19/2014 INST99-2011
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
Kit Assembly 99-2011
All vehicles (continued)
24
All applications:
1. Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
adapter from Metra or AXXESS. Reconnect the
negative battery terminal and test the radio
for proper operation.
2.
Mount the completed assembly into the
dash and reassemble dash in reverse order
of disassembly.
Note, for Cadillac Eldorado/Seville 1992-1995:
(1) Align the tabs on the bottom of the radio
trim plate/radio bracket assembly with
notches in the sub-dash. (Figure C)
(2) Secure with the (2) carriage bolts and (2)
Keps nuts provided. (Figure C)
Note: For the Buick Le Sabre, Oldsmobile
Aurora and the Pontiac Bonneville the (3) speed
clips and screws provided with the kit will need
to be installed into the sub-dash where the
screw holes line up on the kit.
(Figure C)
1