User Manual

23
Kit Assembly 99-2011
1.
Using carriage
bolts and Keps
nuts supplied,
mount the factory
brackets to the
radio-trim-plate/
radio-bracket
assembly
(keeping in mind
which bracket is
top and which
one is bottom).
Continue to
Kit Assembly
“All vehicles”
*Note: Figure
A shows the
radio installed
for illustrative
purposes only.
Pre-kit Assembly for Cadillac
Fleetwood/Brougham 1990-1996
*(Figure A)
TOP FACTORY BRACKET
BOTTOM FACTORY BRACKET
Top factory bracket
Bottom factory bracket
All vehicles
For both applications:
1. Insert the radio brackets to the edge of
the radio trim plate. (Figure A)
For ISO DIN radio provision with pocket:
2.
Mount the pocket to the radio brackets
with (4) #8 X 3/8” Phillips screws
supplied.
3. Insert the radio through the rear of the
completed pocket assembly, and then
secure using screws supplied with the
radio. (Figure B1)
Continue to “All applications”
For double DIN radio provision:
2.
Insert the radio into the completed
assembly through the rear, and secure
using screws supplied with the radio.
(Figure B2)
Continue to “All applications”
(Figure A, for both provisions)
(Figure B2)
(Figure B1)